|
Technical Information |
Rockapon PFA-1610 |
|
|
Emulsion Chemicals |
||
|
Emulsifiers |
||
|
|
|
Rockapon PFA-1610 is a Phosphated esters, Nonylphenol Etoxylate based emulsifier. |
|
|
|
|
|
|
Properties |
|
|
|
Appearance |
Clear to slightly
hazy liquid @25°C, Clear liquid @35°C |
|
|
Acid Value |
67.0-72.0 (mg
KOH/g) |
|
|
Ionity |
Anionic |
|
|
PH (1:10 solution) |
1.5 |
|
|
Solid content % |
98 ± 1 |
|
|
Density (gr/cm3) |
0.989 |
|
|
Moisture % |
0.7 |
|
|
Safety |
According to our best experience, it
hasn’t any harmful effect on health. |
|
|
|
|
|
|
Application & Recommendation |
|
|
|
|
Rockapon
PFA-1610 can be used to prepare a broad range of commercial emulsion polymers
including acrylics, vinyl-acrylics and styrene-acrylics. Such polymers find
application in latex paints, adhesives, paper coatings and textiles. Rockapon PFA-1610 is typically
converted to its salt form (sodium, ammonium, and amine) for use in emulsion
polymerization. This is usually done in-situ by neutralization of the diluted
phosphate ester with the desired base. Films of polymers made with Rockapon PFA-1610
exhibit enhanced corrosion resistance and superior heat and light stability,
which makes them especially desirable for metal coating applications. When properly used in conjunction with other
anionic and nonionic surfactants, Rockapon PFA-1610 allows for the
trouble-free commercial production of extremely stable emulsion polymers. |
|
|
|
|
|
|
Note |
|
|
|
|
According to our best knowledge and technical
experiments, the above data is true and accurate. Regarding to variety of
consumption procedures, it is recommended to evaluate the information before
use. |
|
|
|
|
|
|
||
