Technical Information

Rockytan TAK

Retanning

Syntans & Auxiliaries

Rockytan TAK is an anionic retanning and neutralizing syntan with good buffing and dyeing properties.

Properties

Appearance

White powder

Nature

Organic and inorganic compounds

Ionity

Anionic

PH(1:10 solution)

7.5 - 8

Safety

According to our best experience, it hasn’t any harmful effect on health.for more information refer to MSDS

Storage Conditions

Store in a cool, dry, well-ventilated area (15-25°C), out of direct sunlight.

Packing

25 Kgs PE bags

Application & Recommendation

Rockytan TAK has very good neutralizing capacity. It has excellent light-fastness.

Rockytan TAK can be used single in neutralization process. It is used as neutralizing tanning and retanning materials for aniline, Nubuck, suede and other types of leather where full colors, brilliance, levelness, light fastness and heat resistance are desired.

Its better application occurs when used between Sodium formate and bicarbonate about 0.1-0.7% for 30-45’.

 Note : Due to its buffery effect, when used in neutralisation, the PH does not exceed 7-7.5 even by adding powerful alakalies like caustic soda.

300%                            Water                         35°C    

1%                               Sodium Formate           30’

0.1-0.7%                      Rockytan TAK                 30’

0.5-0.7%                      Sodium Bicarbonate     30’

Note

According to our best knowledge and technical experiments, the above data is true and accurate. Regarding to variety of consumption procedures, it is recommended to evaluate the information before use.

#2, Ground Floor, Bldg. 43, Iranshahr Ave., Tehran – IRAN

P.O.Box: 15815 / 3736

e-mail: info@rockchemie.com

Tel: +98 (21) 88843227 - 8

Fax: +98 (21) 88826168