Material Safety Data Sheet

Naphthalene sulphonic acid formaldehyde condensation sodium salt

Health Safety Environment

Issue date: November 1, 2005

 

 

 

 

 

 

1.PRODUCT INFORMATION

Product Name : Naphthalene sulphonic acid formaldehyde condensation sodium salt

Product Use : leather and concrete

Chemical Family : dispersing agents

Contact Address : P.O.BOX 15815/3736 TEHRAN-IRAN

IN CASE OF EMERGENCY      CALL :+98 (21) 88843227 – 8   FAX :+98 (21) 88826168

 

2.HAZARDOUS INGREDIENTS

The product may contains traces of formaldehyde 

3.HAZARDS IDENTIFICATION

Eye: Take care in handling and keep away from eyes.

Skin : not available

Ingestion: As a chemical, It is harmful for digestion system.

Inhalation: No hazards but as it is in powder form, try not to inhale.

 

4.FIRST AID MEASURES

INHALATION: Leave the site.

INGESTION: Rinse mouth with water several times.

EYES: In case of contact, immediately flush eyes with plenty of water for at least 15 minutes and get medical attention.

SKIN: Wash with water.

 

5.FIRE AND EXPLOSION DATA

FLAMMABILITY: Non-Flammable

SPECIAL FIREFIGHTING PROCEDURES: Fire- fighters should wear self- contained breathing apparatus and full protective clothing when fighting chemical fires.

RADIOACTIVITY PROPERTIES: This product has not any radioactivity effect

 

6.ACCIDENTAL RELEASE MEASURES

   Prevent forming and diffusion of dust in the environment as for as possible. Prevent product to be discharged in the sewerage system.

 

7.HANDLING AND STORAGE

HANDLING: Wash thoroughly after handling. Avoid contact with eyes. Avoid ingestion.

STORAGE REQUIREMENTS: Keep container tightly closed when not in use. Keep out of moisture.

 

8.EXPOSURE CONTROLS AND PERSONAL PROTECTION

PERSONAL PROTECTIVE EQUIPMENT:

Eyes: Avoid eye contact. Wear appropriate protective eyeglasses.

Skin: Wear gloves.

 

9.PHYSICAL AND CHEMICAL PROPERTIES

Appearance

Beige powder

Ionity

Anionic

Nature

Naphthalene sulphonate acid formaldehyde condensation condensate

PH (1:10 solution)

7 ± 1

Bulk Density (kg/Liter)

400 - 500

Stability to light temperature (40% solution in water)

>150°C

Stability to PH variation (40% solution in water)

Very good from 1 - 13

Solubility in water

complete

Chloride (expressed as chlorine ions)

<100 ppm

Sodium sulfate %

≤ 7.0

Packing

25 Kgs PE bags

 

10.STABILITY AND REACTIVITY

STABILITY                : Stable under normal conditions of use.

 

11.TOXICOLOGICAL PROPERTIES:

Harmful if swallowed.

ACUTE OVEREXPOSURE EFFECTS :

INHALATION : May cause sensitization.

INGESTION : Harmful if swallowed .

EYE CONTACT : May cause irritation.

SKIN CONTACT : No Hazardous.

ACUTE TOXICITY : No Toxic  

CHRONIC EFFECTS:  

SENSITIZATION:          not available

CARCINOGENICITY:   not available

MUTAGENICITY:    not available

REPRODUCTIVE TOXICITY:  not available

 

12-ECOLOGICAL INFORMATION

Use the product following safe working procedures and avoiding to discharge it in the environment.

 

13 . DISPOSAL CONSIDERATIONS

WASTE DISPOSAL: Disposal should be made in accordance with EC, national and local regulations.

 

14. SHPPING  INFORMATION

NOT RESTRICTED :

 AIR- ICAO/ IATA   N/A

SEA-IMO/IMDG      N/A

ADR/RID-ADNR      N/A

 

 

15. REGULATORY INFORMATION

NAME(S) ON LABEL: Naphthalene sulphonic acid formaldehyde condensation sodium salt

CLASSIFICATION/SYMBOL : Non-Hazardous

RISK PHRASES: May be Irritating to eyes.

SAFETY PHRASES:  Wear suitable clothing, gloves and dust protection.

 

16.OTHER INFORMATION

  This safety data sheet information is considered to be true and correct at the present time. Nevertheless the data supplied and recommendations can not be taken as a guarantee .As the use conditions of the product are out of our company control, it is responsibility of the user to determine the safety of the use condition.

 

 

 

 

#2, Ground Floor, Bldg. 43, Iranshahr Ave., Tehran – IRAN

P.O.Box: 15815 / 3736

e-mail: info@rockchemie.com

Tel: +98 (21) 88843227 – 8

Fax: +98 (21) 88826168